Bikes

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bike-packing. The stainless steel frame is strong, comfortable, and surprisingly lightweight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bike-packing. The stainless steel frame is strong, comfortable, and surprisingly lightweight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bike-packing. The stainless steel frame is strong, comfortable, and surprisingly lightweight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

The Otso Fenrir is a ride-anywhere bike for bike-packing races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while the extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKE-PACKING Every last feature of Fenrir Ti is optimized for bike-packing. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single-speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single-speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears but want to convert to single-speed later on, there is a single-speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bike-packing bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet the demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.  

Voytek changes the fat bike game. It is fast, lightweight, agile, and can handle even the sharpest turns of your local singletrack with ease. Think of it as a mountain bike that can fit fat tires with adjustable geometry. We paired a narrow pedal stance—aka Q factor—with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack without sacrificing ride quality. When the weather turns and the snow turns to dirt, swap out the 26" fat wheelset for a 29" MTB wheelset to keep the party going all year. THE Q-FACTOR IS THE KEY The Voytek has the narrowest Q-factor of any fat bike in the world at 183mm. With a narrow Q-factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control—the wider Q-factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The Voytek frame was designed around an 83mm bottom bracket, whereas most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don't need to compromise agile handling to ride up to 4.6" tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes the bottom bracket height by up to 4mm and the head tube angle by +/.5º. In the forward position, you've got an aggressive, responsive Voytek for your next race. In the rear position, you've got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that's the best of both worlds. PLUS OR FAT? FAT OR PLUS? We're internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we're riding 4" tires. When spring comes and the trails turn to dirt, we swap out tires and ride 29" plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. MODERN GEOMETRY Voytek's longer top tube, short chainstays – the shortest in the world for a fat bike – and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso™ carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.

Voytek changes the fat bike game. It is fast, lightweight, agile, and can handle even the sharpest turns of your local singletrack with ease. Think of it as a mountain bike that can fit fat tires with adjustable geometry. We paired a narrow pedal stance—aka Q factor—with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack without sacrificing ride quality. When the weather turns and the snow turns to dirt, swap out the 26" fat wheelset for a 29" MTB wheelset to keep the party going all year. THE Q-FACTOR IS THE KEY The Voytek has the narrowest Q-factor of any fat bike in the world at 183mm. With a narrow Q-factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control—the wider Q-factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The Voytek frame was designed around an 83mm bottom bracket, whereas most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don't need to compromise agile handling to ride up to 4.6" tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes the bottom bracket height by up to 4mm and the head tube angle by +/.5º. In the forward position, you've got an aggressive, responsive Voytek for your next race. In the rear position, you've got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that's the best of both worlds. PLUS OR FAT? FAT OR PLUS? We're internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we're riding 4" tires. When spring comes and the trails turn to dirt, we swap out tires and ride 29" plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. MODERN GEOMETRY Voytek's longer top tube, short chainstays – the shortest in the world for a fat bike – and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso™ carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.

The Waheela C is a carbon-framed drop bar bike with adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under the tire), the Waheela C is ready. GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and the height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under the bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premier carbon fiber factories in Taiwan and come with a 5-year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.

Our original all-road bike. The Warakin Stainless was one of the first bikes we built when we created Otso in 2016. It's been such a hit over the years that we haven't changed the geometry one bit. Stainless steel has a ride quality that is familiar, yet surprising—smooth like steel, lively like titanium. The Warakin Stainless is ready for your next century, three-day bike-packing trip, or afternoon group ride. STAINLESS STEEL The supple and smooth ride quality of steel meets the corrosion resistance and lively feel of titanium. Stainless steel is lighter than you think, loads of fun, and ready for your next full day on the saddle. It's a frame material that is as unique and seldom used as it is versatile and excellent for multiple types of riding. TIRE CLEARANCE 700c? Check! 650b? Double check! 29er? Triple check! Warakin Stainless has massive tire clearance because no two roads are the same. The Warakin Stainless has clearance for 700c x 51mm, 650b x 51mm, or 29" x 2.1" tires. Race gravel with 700c x 38mm semi-slicks, then swaps in 29" x 2.1" for that bike-packing trip with gnarly trails without needing to ride a different bike. TUNING CHIP™ The Tuning Chip rear dropout system allows for adjustable bike geometry by changing the wheelbase by up to 20mm, bottom bracket height by up to 4mm, and head tube angle by 0.2º. This means you can easily switch between a bike with the responsive, agile handling of a shorter wheelbase and a bike with the confidence and stability of a longer wheelbase just by flipping the Tuning Chip. Use the back position for stability and confidence with its longer wheelbase, lower bottom bracket, and slack head tube angle. The front position is ideal for winding singletrack or the CX course with its shorter wheelbase, higher bottom bracket, and steeper head tube angle. The center position is the best of both worlds. TOP PERFORMER Unparalleled ride quality results from the combination of stainless steel and carefully thought-out frame geometry. The Warakin Stainless was designed by our engineers in Minnesota and manufactured by top steel frame fabricators in Taiwan. PROGRESSIVE GEOMETRY Warakin’s progressive geometry takes a page from the cross-country MTB playbook. Increased top tube length and a shorter stem maintain stack and reach while providing a lively ‘can-do’ attitude on rougher terrain. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. FOR THE LONG HAUL Numerous frame braze-ons allow Warakin to accommodate cable routing clamps, three water bottles, fenders, racks, frame bags, and more. Three braze-ons on either side of the fork allow for additional storage.

The Warakin Ti is an efficient, responsive, sprightly titanium bike that can handle any road in any weather. Using the progressive geometry of its Warakin Stainless predecessor, the Warakin Ti pairs unrivaled ride quality with the superior quality of titanium. It's a lightweight, durable, lively machine that will carry the rider to where they choose to go while enjoying every pedal stroke along the way. SUPERIOR TITANIUM The 3Al/2.5V B338 grade 9 titanium that we use for the Warakin Ti is the same titanium that has been a bicycle industry favorite for decades, and with good reason. Equal parts science and magic, titanium is durable, lightweight, lively, corrosion-resistant, and timeless. The tubing is seamless, butted, clean, and strong. It's because of the superior quality of titanium that we chose this material to lend to our heralded Warakin geometry as a bike that will endure the roughest roads in the harshest conditions and tell the stories for decades to come. EXTRA TIRE CLEARANCE If a bike is meant to ride any road in any condition, it needs to fit tires and wheels that will get you to and from your destination, while handling every bump along the way. The massive tire clearance of the Warakin Ti was built with this in mind. It'll fit 29" x 2.1" for that road that doesn't actually appear on the map, just as easily as 650b x 50mm for windy forest trails, or 700c x 35mm (or 700c x 50mm if you want a little extra) for your next gravel race. Because a frame that can last forever needs to have the ability to adapt to whatever the road (and the future) may bring. VERSATILITY Like all Otso bikes, the Warakin Ti sports our patented Tuning Chip rear dropout system, which allows the rider to lengthen or shorten the wheelbase by up to 20mm and raise or lower the bottom bracket by up to 4mm. For chunky gravel on remote roads, the longer wheelbase of the rear position is set for stability and comfort. For a quick spin around town or the CX course, the front position makes for snappy handling and agile control. The middle position? That's the best of both worlds. The Tuning Chip rear dropout system was designed because the bike should be just as versatile as its rider. TOP QUALITY Designed by the Otso engineering team, Warakin Ti frames are built by top fabricators in Taiwan and come with a five-year limited warranty. All bikes and frames are inspected and assembled at our headquarters in Minneapolis, MN USA. PROGRESSIVE GEOMETRY The progressive geometry of the Warakin Ti takes a page from the cross-country MTB playbook. Increased top tube length and a shorter stem maintain stack and reach while providing a lively ‘can-do’ attitude on rougher terrain. EXTRA MOUNTING OPTIONS Numerous braze-ons accommodate three bottles, fenders, racks, cable routing clamps, frame bags, and more. Mix in the Wolf Tooth B-RAD System to even further increase on-bike storage options. SUSPENSION-READY The geometry of the Warakin Ti includes an axle-to-crown measurement of 420mm, which allows for a shorter suspension fork.

The Mukluk is Salsa's most versatile fat bike, designed and engineered to excel in a wide variety of conditions. The frame utilizes 197mm rear spacing to accommodate up to 5" tires, and the 100mm threaded bottom bracket allows a wide range of crank (Q-factor) choices. Alternator 1.0 dropouts allow for short chainstays and easily support single speed or geared drivetrain options. The Mukluk can do it all.

We believe in raising kids who excel at life and always have the courage to tackle whatever comes next. That’s why the Strider 12 Sport Balance Bike has become the ultimate vehicle for kids as young as 18 months. Your tiny-legged toddler is ready to ride, thirsting for freedom, and craving adventure. Give your child the bike that set the world on fire and encourages them to experience the thrill of riding while developing confidence and coordination…before they’re even out of diapers. The Sport is our best all-around model. Mini-grips mean little mitts can easily take control and make this lean, mean, durable bike the biggest bang for your buck, which is probably why it’s our best seller. The 12 Sport is the perfect bike to take your child from baby steps to big strides, all without busting out a toolkit (tool-free seat and handlebar adjustment AND tires that never go flat). The Strider Sport has a seat height range from 28-48 cm (11-19 in.), which means it fits a huge range of inseam lengths (30-51 cm [12-20 in.]). The cushy, padded seat and an additional extra-long seatpost means your child will get years out of their Strider. Boring specs aside, this is the bike that introduces kids to the freedom, power, and responsibility of riding. Now they have the power to keep up with you when you’re out and about. No more strollers. No more of those ridiculous kid leashes. Your child can experience the truly amazing freedom that comes with being a part of the Strider family. Size & Fit - For Ages 18 months to 5 Years - Fits inseam lengths (30-51 cm [12-20 in.]). - Max. Rider Weight: 27 kg (60 lbs.) FRAME Steel Frame Assembled Weight: 3.0 kg (6.7 lbs.) No-Tool Assembly Fully Adjustable with Easy-Adjust Clamps HANDLEBAR Handlebar Height: 46 - 56 cm (18 - 22 in.) Mini-Grip Handlebar with Safety Pad SEAT Seat Height: 28 - 48 cm (11 - 19 in.) Includes One, Ergonomically-Padded Seat Includes Standard and XL Seatposts WHEELS Ultralight Molded Wheels with Maintenance-Free Sealed Cartridge Bearings and Flat-Free Foam Rubber 12” Tires FOOTREST Built-In Footrests

Norco’s Run Bikes are the perfect way for little ones to learn the basics and develop a love of riding. Featuring 12-inch air tires and a lightweight aluminum frame with lower standover to fit smaller riders, kids can start riding early and often. As your little ripper discovers their need for speed, they can get used to controlling it with the easy-to-use rear v-brake and small lever with reach adjust. LIGHTWEIGHT FRAME AND COMPONENTS Our run bikes come complete with and aluminum frame, size scaled tubing and a rear hand brake on our 12-inch models to help little ones learn to stop when the time is right. QUALITY FEATURES AND TOUCH POINTS The premium components list is large on these little run bikes including stainless steel spokes, a quality lightweight saddle and soft krayton rubber grips. EASY TO USE BRAKES Wee ones riding the 10-inch Ninja and Mermaids will get used to controlling their riding with their feet or move up to hand brakes on the 12-inch run bikes with the easy-to-use rear v-brake with a small brake lever with reach adjust. GEOMETRY AND FIT Designed with a low standover height and new drop outs for our littles to easily climb on and off and build skills and confidence. ALUMINUM QR SEATPOST CLAMP As your little one grows - the quick release seat post clamp will come in handy as it allows for easy adjustment of seat height for kids that want to get up and go!

Training wheels or a balance bike It's a dilemma many parents face today. Most adults learned to ride a bike with stabilizers, but what if there were an easier way There is. You're looking at it. Instant success. That's what we wanted kids to experience on the Strider 14x Sport. We put together all the right ingredients to give your tyke a taste of confidence to successfully shift from riding a balance bike to pedaling like a pro as quickly as possible. Why Because of the success your child experiences when they ride a Strideris going to stay with them throughout their life. Kids from all over the world are learning how to ride on the 14x Sport. The confidence and freedom that comes with learning how to pedal a bike rockets them into a level of the awesome sphere they didn't even know existed. Plus, parents get to see their child grow and develop right before their eyes. Pretty cool, right The 14x starts off as a balance bike, which helps kiddos who either haven't been on a bike before or are veteran Strider riders gain confidence and balancing ability on a bigger bike. Once your little renegade is ready to pedal, just attach the Easy-Ride Pedal Conversion Kit (sold separately) andVOILÁ!You got the most adjustable, most amazing pedal bike in the world. It gets better. If your mini-me is sprouting up faster than a weed amped up on fertilizer, the adjustable seat and handlebars meanthe14x Sport will continue to fit them. Converting the 14x from balance bike to pedal bike is super quick and easy (we even give you the wrench to screw in the only bolt) and the pedal kit has coaster brakes making skid marks easy peasy. Now, your kid is pedaling around the neighborhood thinking you're a superhero forgetting them a 14x. They're realizing their skills and freedom with newfound confidence and thirst for adventure. And now, your neighbors all have to step up their parenting game. Yeah, we'd call that a parenting win. FULL SPECS: - Size: 14" Wheels - Weight: Bike without Pedal Kit 5.7 kg (12.5 lbs.) - Weight of Bike with Pedal Kit (sold separately) 6.9 kg (15.1 lbs.) - Brakes in pedal mode (pedal kit sold separately): Coaster Brakes - Brakes in balance mode: None - Fits Inseam: 40-58 cm (16-23 in.) - Rider Height: Approx. 95-125 cm (37-49 in.) - Rider Age: 3 to 7 years - Seat Height: 38-55 cm (15-22 in.) - Maximum Rider Weight: 36 kg (80 lbs.) - Frame and Fork: Steel - Head Set: Strider Custom Polymer - Steering Clamp: Binder Clamp (5 mm Wrench Adjustable) - Seat Clamp: Easy Adjust Lever Clamp (No-Tool Adjustment) - Tubes: Schrader Valve Air Tube - Tires: 14" x 1.75" All-Purpose Tires - Wheels: Alloy Rims and Hubs, Chrome Spokes - Footrest: Included - Stem: Strider Custom Alloy/Steel, 25.4 mm Bar Mount - Handlebar: Strider Custom 22.2 mm, 68 mm rise, 25.4 mm mount, 4°backsweep/ 4°upsweep - Grips: Strider Custom 22.2 mm - Seat: Strider Custom Performance Saddle - Seatpost: 22.2 mm x 293 mm - Tools Included: 5 and 6 mm Hex Wrenches - Assembly: Bike is 85% Assembled - CPSC Tested and Approved

Norco's 14-inch Roller and Coaster all-purpose mountain bikes are perfect for getting your 3- to 4-year-old youngster riding trails and having fun. These bikes feature Norco's rugged but lightweight aluminum frame, 14-inch wheels, and quality components across the board. With a familiar coaster brake as well as front and rear hand brakes, young riders can confidently get rolling and dependably stop. They'll love the eye-catching colours and comfortable seat as they experience two-wheeled fun and freedom. LIGHTWEIGHT FRAME AND COMPONENTS Our 14-inch all purpose kids mountain bikes come complete with size scaled tubing and are carefully fitted with the lightest components for optimal responsiveness and overall ride experience. QUALITY FEATURES AND TOUCH POINTS The premium components list is large on these little bikes including stainless steel spokes, a quality lightweight saddle, soft krayton rubber grips. Jr. BMX pedals were specifically selected for durability, safety, and long-lasting performance. We’ve added small levers and reach adjust to fit small hands so youngsters can learn how to use hand brakes quickly. Brakes are easy to use inspiring confidence so they can get used to using hand brakes at a younger age. GEOMETRY AND FIT Designed with a low top tube for standover height and a shorter chainstay length to give the ability to fit smaller children on bikes with larger wheels. Included is a short stem and wide bar for added stability to make it easier than ever before for young riders to build skills and confidence. ALUMINUM QR SEATPOST CLAMP As your little one grows - the quick release seat post clamp will come in handy as it allows for easy adjustment of seat height for kids that want to get up and go!

The Yorkville combines an upright, comfortable riding position with a dash of speed that makes every ride enjoyable. This lightweight aluminum bike pedals up hills easily and corners beautifully thanks to the efficient road bike-sized wheels and a 21-speed Shimano drivetrain. Enjoy sure-stopping linear pull brakes and a plush seat, while the suspension seat post smoothes out the bumps along the way.

The Sureshot is designed with a more ramp/park/trails geometry than our other frames. Utilizing a low BB, longer rear end, mellower head angle and removable brake lugs, this frame is a true all rounder. - Tubing: Sanko Japanese seamless 4130 chromoly - Brake mounts: removable - brake kit available separately

The Sunday Darkwave frame is built out of 100% 4310 chromoly and features Sunday's signature dent-resistant wave down tube to give riders a little extra peace of mind when things don't go according to plan. It stays looking clean with refined details like an integrated seat clamp, tapered stays, and integrated chain tensioners. Removable brake hardware and gyro tabs are also available when you need them and disappear when you don't. - 100% 4130 chromoly frame - Broc Raiford signature geometry - Removable U-brake hardware and Gyro tabs - Integrated seat clamp - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it. - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings. - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal.

The Blueprint is a bike for new riders that is built around a pro-level geometry to help them progress faster. This bike is equipped with hassle-free parts like Odyssey Springfield brakes, a Sunday Freeze stem and Current 2.4” tires to help keep you focused on the important part - riding. The Blueprint comes with an integrated head tube this year for greater durability, ease of assembly and pro style points. Key Features - Sunday Current 2.4" - Odyssey Springfield Brakes - FSA Integrated Headset - Sunday Cornerstone Grips - Sunday Freeze Front Load Stem - Sunday Sabretooth Sprocket - KMC S1 Chain

The Primer 16” is better than ever and perfect for younger riders with lots of tricks up their sleeves. The Primer rides like a pro-level bike that has been scaled down to meet the needs of smaller BMXers. Sunday's unique geometry helps them quickly adapt to bigger bikes as they grow. The Primer is packed with quality parts like Odyssey Springfield Brakes and a fully sealed cassette hub for reliability that you can count on every time. Key Features - 16" Pro-Style Geometry - Sunday Current 16" Tires - 10t Cassette Hub - 40mm Top Load Stem - Odyssey Springfield Brakes - FSA Headset - KMC S1 Chain

Jake Seeley's signature frame is designed to complement his progressive, technical street riding. The Street Sweeper evolves directly from Jake Seeley's original Broadcaster frame by using shorter chain stays, a steeper head tube angle, a taller bottom bracket and smaller hollow dropouts with integrated chain tensioners. Built with versatility in mind, the Street Sweeper features removable u-brake hardware and Gyro tabs. The frame's front triangle makes use of traditional round Nightshift style top and down tubes with proven internal gusseting. - 100% 4130 Chromoly Frame - Nightshift style, double-butted, top and down tubes with proven internal gusseting - Integrated seat clamp - Butted Seat Tube & Miter Cut Top Tube: The seat tube is where all three triangles of the frame meet and it is crucial to keep this tube strong - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. The are both angled on the inside for improved chain clearance and weight savings - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in place as well as simplify wheel removal - Removable Brake Hardware: Refined removable brake mounts and cable channel improvements that provides benefits with or without a brake setup

When your early-grade-school adventurer is ready for their first foray into the excitement of shifting, it starts with the Cleary Owl. Cleary built this bike around the drivetrain to take your explorer higher and further every time. Powered by an internally geared Sturmey Archer 3-speed hub that's activated by a buttery smooth Sturmey Archer trigger shifter. The Owl's shifting mechanism is encased in an aluminum shell inside the rear hub so it will shift smoothly with no maintenance for thousands of miles. Speed and acceleration are no problem with the 127mm alloy 3-piece cranks. Too fast too soon? The Owl stops on a dime thanks to the super-strong Tektro junior v-brakes. To determine the best fit, Cleary suggests measuring your child's inseam and referencing their size chart. The Owl is the best fit for riders with an inseam measurement of 19-23". A rider with a 21" inseam will sit on the Owl with their bottom on the saddle, flat-footed on the ground with the seat at its lowest position. At that same saddle height, riders with a 19" inseam will happily sit with only the balls of their feet on the ground. As long as a child has an inseam of 19", their arms and torso are long enough so they can reach the handlebars comfortably.

The ALVX AF+ is the latest version of Alex Donnachie’s signature ALVX frame. Featuring the same super tech geometry and ultra short rear end, but now with an updated invest cast chainstay yoke which maintains the tire clearance as well as creating a more rigid rear triangle and it also looks pretty sick. - Invest cast chainstay yoke which creates more clearance for the tire for when your wheel is slammed, because this part is cast and heat treated it strengthens the rear end of the frame by stiffening it up - 7mm thick invest cast dropouts to provide good support for your axle, and the small shape has been designed for grinding meaning there's no overhang to catch on ledges or rails,. The dropout is heat treated before welding making it extra tough with integrated chain tensioner bolts inside - Brake mounts: none - External gussets for strength - Sanko Japanese seamless 4130 chromoly

BSD Freedom is Kriss Kyle's signature frame, designed to perform well on all terrain. This frame combines the stability of a low 11.5" BB, the responsiveness of a 75 degree head angle and the versatility of a short rear end. To create a stiffer rear triangle we've utilized an invest cast wishbone and invest cast seatstay bridge. - Constructed from Japanese Sanko seamless 4130 chromoly tubing, triple butted - Removable brake mounts, brake kit sold separately - Head tube and bottom bracket heat treated and CNC machined 4130 - Heat treated and investment cast 4130: chainstay wishbone, dropouts, and seatclamp - Frame weight: 5 lbs

The Grime frame is the signature frame of Denim Cox. Whether he's riding motocross, Barbie bikes or BMX, you know Denim tears it up on all terrain. Designed to Denim’s specification, with a steep 75.5 headangle, a 12.8 - 13.2” rear end length with an invest cast chainstay yoke for extra tire clearance and a 9” standover.

Designed to make those first years in the sport as fun as they can possibly be, the Seed is a scaled-down mini-machine, which has been lightened to make it as easy as possible for a younger rider to reach their goals. It's packed full of the latest components from SALT, like the Junior 40mm reach stem and Tracer tires to round out what is, without a doubt, the best 16" complete bike we've ever produced.

The Primer is a serious starter bike at a seriously great price. The Primer Park model with a park specific geometry and an Odyssey Gyro that is connected to a pro-level Odyssey M2 Trigger lever and pre-cut dual lower cables for better braking and easier maintenance. Built around a pro-level geometry in a range of top tube sizes, the Primer is spec’d with quality parts like Odyssey Springfield brakes and Path Pro tires. The 2022 Primer also includes a fully sealed rear cassette hub and proven parts like the Sunday Freeze Stem and an FSA Headset. Shops and riders everywhere know that the Primer is the bike to beat in this price range. Key Features - Park Specific Geometry - Odyssey Gyro G3 - Odyssey Springfield Brakes - Odyssey M2 Trigger Lever - 9t Sealed Cassette Hub - Sunday Freeze Top Load Stem - Sunday Cornerstone Grips - Odyssey Path Pro OEM 2.4" Tires - FSA Headset - KMC S1 Chain

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance

Steel Commuter and Gravel Bike Preamble is a hard-boiled steel commuter built for comfort, durability, and buffoonery on pavement and gravel. Nothing More is Needed. Nothing Less Will Do. The challenge was thus: Build a serious steel bike and give it only the attributes that matter most. Make it quick and comfortable on pavement, as well as confident and compliant on degraded surfaces. What the Enginerds put forth is Preamble, a pavement and gravel utility worker that proves you don't need to cut corners or clip coupons to make a more affordable steel bike. You just need to keep shit simple. Preamble can run racks and fenders and carry a couple water bottles. Surly was raised on stealing basic cable, after all. Smooth and efficient on asphalt, Preamble's double-butted main triangle provides a resplendent ride feel and withstands abuse from life's inevitable potholes. Make it your own with flat bars, drop bars, a basket, or bags. On the road to steel euphoria, Preamble is the gateway drug. Let facts be submitted to a candid world: - Offered in flat-bar and drop-bar configurations - Easy T-Shirt sizing to fit nearly every rider (XS, S, M, L, XL) - Sloping top tubes on XS and Small frames for improved standover and comfort - To offer the best rider experience for every frame size, XS and S frames get 650b wheelsets while M–XL get 700c - Custom-cast single-position vertical dropout

The Scouts are great bikes for dedicated riders on a budget. The Scout line is built with more aftermarket parts than ever before, including the Odyssey Twisted Pro pedal and Path Pro tire. Bike shops and riders will appreciate the fully sealed front and rear hubs, and awesome details like Odyssey signature grips and the Springfield Brake system. - Odyssey/Sunday build kit - Sealed front and rear hubs - Approx. Weight: 26.82lbs (with brakes)