Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Racks
$120.00
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring!
- NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points
- NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts
- Tubular AL-6061-T6 construction
- 135 x 325mm cupped deck
- Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included
- Large pannier hook stops
- Black powdercoat finish
- 15kg maximum recommended load
- Mounting kit included
- 765g
$120.00
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$120.00
Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
$110.00
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur.
- Requires dual-sided, mid-blade mounts
- Wide crossbars provide sturdy, secure attachment points for a pannier
- Tubular 4130 CroMoly construction
- Mounting system provides 35mm range of infinite adjustment to position the rack
- Includes mounting hardware kit
- Powdercoat finish
- Maximum Recommended Load: 55lbs (25kg)
- Sold in pairs
- Requires inner and outer mid-blade eyelets
$99.00
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
$39.99
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
$60.00
Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs.
- Provides 3-pack mounts on any thru-axle fork
- Axle Pack is rated to 10kg per pair
- Four mounting points you can also choose to run your gear higher or lower depending on your needs
$168.00
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into.
Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- Fits up to 29 x 3-inch tires, with room for fenders.
- Front or rear mountable.
- Works with all dropper posts.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers.
- The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck.
- The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes.
- The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Divide has a load capacity of 55lbs when eyelet mounted.
- For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs!
- Powder coated a sleek and refined shade of black.
- 960g including all hardware and extenders.
- Made in Taiwan.
- Lifetime warranty!
$168.00
The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you.
Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into.
Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
- The Elkhorn comes in two sizes; Short and Tall.
- The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm.
- The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25".
- Front or rear mountable.
- Made from 6061 aluminum the racks are lightweight, stiff, and strong.
- The rack is made from 1/2? (13mm) diameter tubing.
- The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light.
- The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting.
- The Elkhorn has a load capacity of 25 lbs/11.34kg.
- Rack weight (Short): 623 grams with 6" extenders.
- Rack weight (Tall): 652 grams with 6" extenders.
- Powder coated a sleek and refined shade of black.
- If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance.
- Made in Taiwan.
- Lifetime warranty
$79.99
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
$40.99 - $143.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket.
- Simple design for easy use
- Lightweight, yet sturdy
- Steel rack w/adjustable brake bolt mount
- Loading surface = 13" x 5"
- Lightweight at just over 2 pounds
$7.00
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes.
- Small is 8.5cm long from end to end
- Useful for mounting our Constructeur Rear Rack to your brake bridge.
- Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown.
- Note: not required if you mount the rack to metal fenders, as is traditional.
$200.00
Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers.
- Material: 25CrMo4
- Weight: 740 g | 26.1 oz (28'')
- Loading Capacity: 26 kg (tested with 40 kg | 88 lbs)
- Diameter: 10 mm | 0.4 in
$200.00
The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour.
- Material: 25CrMo4
- Weight: 780 g | 27.5 oz (28'')
- Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*)
- 10 mm | 0.4 in
$210.00
The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection.
- Weight: 680g or 24 oz.
- Load Capacity is 40kg or 88 lbs.
- Wheel size 26? or 700c
$150.00
So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go.
- Includes QR Skewer
$90.00
If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also features a longitudinal hole for optimal fit and increased flexibility.
Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping.
- Material: 25CrMo4
- Size: 26" | 28"
- Weight: 560 g | 19.8 oz
- Loading Capacity: 15 kg | 33.1 lbs
- Diameter: 14 / 10 mm | 0.6 / 0.4 in
$185.00
The Tubus Fly is made of two stainless-steel tubes, making it the purist in the lightweight class. This 369-gram masterpiece carries 18 kilograms of luggage, making this model one of the most efficient racks available. With the Fly, optical pleasure and high function work in perfect harmony.
$255.00
The GRAND TOUR has what it takes to become a new tubus classic! With its narrow but functional loading area, it combines stability and extreme rigidity with a discreet appearance. The luggage carrier feet are reduced and designed as a minimalist tube construction.
The GRAND TOUR packs the 26 kg payload with ease, making it almost indispensable on modern touring bikes. It provides faithful service thanks to its second loading level and the option of using a tensioning strap both lengthwise and crosswise.
$185.00
Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames.
- Material: 25CrMo4
- Size: 26'' | 28'
- Weight: 800g | 28.2 oz (26" | 28")
- Loading Capacity: 26 kg | 57.3 lbs
- Diameter: 10mm | 0.4 in
$200.00
The sturdy Lowrider by Tubus – now also in stainless steel!
Highly durable, resistant to rust and can be positioned flexibly. An indestructible, uncomplicated travel companion in an elegant style!
- Stainless steel version
- Elegant style thanks to polished surface
- Indestructible
- Matches the appearance of the bike beautifully
- Approved for 18 kg | 39.7 lbs
- With lamp holder
- Size: 26"/28"
- Weight: 500g/17.6-ounce
- Diameter: 14/10mm | 0.6/0.4-ounce
$395.00
TARA has no frills in its form, is uncomplicated and variable in its assembly – now even lighter in a titanium version.
$200.00
A low-profile rear carrier with a minimalist approach, the Vega Evo is made for everyday commuting or as a lightweight weekend trip carrier. It utilizes double struts for attachment to the seat stays. The Vega Evo features 3D-feet and stay mounting for the 2012 models on. There are four points that can be attached to your frame (even with small frames).
- Weight: 510g/18 ounces
- Load capacity: 25kg/55 pounds
- Wheel sizes: 26-inch/700c
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- 625g
- 55lb weight capacity
$64.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels
- Compatible with bike frames equipped with disc brakes
- Tubular aluminum rear rack for loaded touring
- MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets
- 6061 T-6 hollow aluminum
- 55lb weight capacity
- 680g
$57.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061 T6 alloy construction
- To be mounted on bikes with disc brakes
- 625g
- 55lb weight capacity
$64.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- Spring clip for additional cargo security
- Designed for compatibility with disc brakes
- 800g
- 55lb weight capacity
$57.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- Spring clip for additional cargo security
- 800g
- 55lb weight capacity
$109.95
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes
- Adjustable rack legs fit most 24" & 26" Fat bikes
- Integrated side bar provides a lower pannier attachment for more cargo on top of the rack
- The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market
- Not compatible with asymmetric rear stay design Fat bike frames
- Includes extra-long mounting bracket and rear light mount
- Max weight 55lbs
- 16.9 x 13.4 x 11.4"
- 2.79lbs
$69.95
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Page 1 of 4
Next page