- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.
The sturdy Lowrider by Tubus – now also in stainless steel! Highly durable, resistant to rust and can be positioned flexibly. An indestructible, uncomplicated travel companion in an elegant style! - Stainless steel version - Elegant style thanks to polished surface - Indestructible - Matches the appearance of the bike beautifully - Approved for 18 kg | 39.7 lbs - With lamp holder - Size: 26"/28" - Weight: 500g/17.6-ounce - Diameter: 14/10mm | 0.6/0.4-ounce
Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.
Unicrown sliding plate - a non-offset, slotted plate; generally used for the upper mounting plate on unicrown construction forks.
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
Lower mount kit for all Salsa's Alternator Racks (sold separately)
Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)
The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
$10.00 - $12.00
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"
The Pickwick 26LT is an update to Brooks' versatile canvas roll-top backpack whose design complements the ease that epitomizes an urban journey by bicycle. Made from water-resistant cotton and genuine Brooks leather trim, the Pickwick has been designed by André Klauser in London and is manufactured in the hills of Tuscany by Italian artisans. The backpack features an internal laptop sleeve and one secret pocket hidden on the back of the bag. The pockets and roll-top system close toward your back, maintaining a sleek appearance while keeping your belongings safe. - Width: 315mm - Height: 440-550mm - Depth: 150mm - Volume: 20-26L - Made in Italy
Axiom's Journey Rack is made of light, rugged aluminum. It is specially designed to handle even the largest and heaviest panniers (sold separately) with additional looped struts that prevent the bags from swinging into the wheel. It also has a platform on top, which adds strength and doubles as a mini fender.
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
Page 1 of 1